Skip to main content
All articles

Materials & Applications

Sequin Mesh vs Sequin Velvet: Choosing the Ground for Your Design

Zhijin / All4LacePublished Updated
All4Lace catalogue reference sequin-allover-003, described as velvet-look. Confirm the actual ground construction and fibre composition for the selected sample.

Choose sequin mesh when the visible net and the layer beneath it belong to the design. Consider a velvet-based option when you want the pile surface to remain part of the look between the sequins. That is a visual starting point, not a rule about stretch, weight or price. The most useful comparison puts both finished fabrics over the same proposed lining and at the same garment position.

The difference starts below the sequins

On a mesh construction, the openings and threads of the net can remain visible where decoration is spaced apart. On a velvet-style surface, the pile contributes another texture around the reflective pieces. The V&A glossary describes velvet with a raised warp pile, which may be cut or left as loops. Commercial names can cover different constructions, however, so a product sold as sequin velvet still needs its own ground description.

Request the fibre composition and construction of the ground separately from the sequin material. A catalogue entry that lists only PET sequins describes the decoration, not every component of the fabric. Equally, mesh does not establish whether the ground is polyester, nylon or another material.

All4Lace catalogue reference sequin-allover-003, described as velvet-look. Confirm the actual ground construction and fibre composition for the selected sample.

Compare transparency and visual depth

Lay each sample on the intended lining, then move it away from that lining to see how the appearance changes. For mesh, note whether the openings, ground colour and lining contrast are intended design features. For the velvet option, look at how much of the underlying surface remains visible among the sequins. Dense decoration can make the ground less obvious in a product photograph.

Use a close view for texture and a more distant view for the whole garment effect. A fabric selected only because its individual sequins look attractive may produce a much busier surface across a large skirt. Conversely, a quiet-looking swatch can become more visible when the wearer moves or the light changes.

All4Lace catalogue reference: 5mm-clear-sequin-polyester-mesh. The photo shows appearance, not a stretch or weight test.

Turn the sample before planning the cut

Turn each finished sample through a half rotation under the same light. Observe the pile surface, the sequin finish and the direction in which overlapping pieces sit. If the appearance changes, mark the intended direction on the approved reference and show how mirrored garment pieces should be arranged. The direction that matters is the one agreed for this design, not a universal rule taken from the fabric name.

A direction-sensitive layout can change how much material is needed for cutting. Ask for a cutting comparison based on the actual width and repeat before comparing price per yard. Otherwise, a lower unit price may be offset by a layout that uses more material.

Match the comparison to the garment

Compare sequin mesh and sequin velvet on the actual garment zone, including ground visibility, movement and seam bulk. Use these questions to organise a sample review. They are not claims that every fabric in one category will pass or fail a particular use.

Match the comparison to the garment
Design taskMesh-based optionVelvet-based option
Sheer sleeve or overlayGround visibility and effect over skin or liningWhether the proposed surface provides the intended look
Fitted garment sectionMovement of the decorated net and lining togetherMovement of the complete ground, pile and decoration
Large panelRepeat, reflection and cutting directionPile appearance, repeat and cutting direction
Close contact or seamsReverse, seam area and chosen finishReverse, seam bulk and chosen finish

Do not choose stretch by the category name

Both the ground construction and the embroidery arrangement influence movement. Some mesh fabrics have limited give, and a velvet-style fabric may be woven or knitted. The lining and attachment can restrict the finished section further. Where fit depends on stretch, ask for the agreed direction, measurement method and representative decorated sample; a statement about the blank ground is not enough.

Questions about mesh and velvet sequin fabrics

Which one is heavier? Compare equal areas of the actual finished fabrics using the same unit; decoration coverage can change the result. Which one needs lining? Consider transparency, reverse-side feel and garment construction rather than the name alone. Can a velvet-based fabric be used for a sleeve? The shape, desired appearance, movement and assembly decide that choice. Are the two catalogue photos a laboratory comparison? No. They are separate appearance references.

Discuss your embroidery project

Send All4Lace the intended garment section and the visual effect you want between the sequins. Include a lining reference and any fit requirement so mesh and velvet-style samples can be reviewed on the same basis.

Contact Zhijin

Continue reading